Clean Projector Lens

Time needed: Approximately five minutes

Maintenance frequency: Bi-weekly

Primary Supplies

  • Lens cleaner

  • Microfiber cloth (two pieces)

Overview

The Xtreme 8K™ utilizes powerful projectors receive build job information from the internal computer, or PC, and project a clear image, layer by layer, onto the build platform. The projectors cast a specific brightness during a print job, and the two projector lenses must remain clean and free of dust/debris.

Step-by-step

  1. Open the printer door.

  2. Locate the two projector lenses above the material tank.

  3. Facing away from the printer, spray lens cleaner on the microfiber cloth.

  4. Gently wipe the first projector lens with the microfiber cloth.

  5. Wipe the lens with the second, dry microfiber cloth. Make sure all streaks are removed.

  6. Repeat Steps 3-5 for the second projector lens.

Important: Never spray lens cleaner or any other chemical inside or near the printer, material tank, or the material itself.