D4K Buildstyle Files Dental Materials

A buildstyle is a set of parameters that tells the printer how to process the printing material.

Tip: See Upload Buildstyle File for instructions connecting a new buildstyle to Live Build DLP Software. See Printer Calibration for instructions calibrating your new buildstyle.

All released D4K buildstyles for dental materials are available for download below:

D4K_385nm_E-Guard Blue_100µm_v2.0.bs
D4K_385nm_E-Guard ET_100µm_v2.0.bs
D4K_385nm_E-Guide ET_100µm_v2.0.bs
D4K_385nm_E-Gum_100µm.bs
D4K_385nm_E-IDB_100µm_v1.0.bs
D4K_385nm_E-Model Light DLP_50µm_v1.0.bs
D4K_385nm_E-Model Light DLP_100µm_v1.0.bs
D4K_385nm_E-OrthoShape_100µm.bs
D4K_385nm_E-Splint Soft_100µm.bs
D4K_385nm_E-Tray_100µm.bs
D4K_385nm_Flexcera Base_100µm.bs
D4k_385nm_Flexcera Smile Ultra+_50µm.bs
D4K_385nm_Flexcera Smile Ultra+_100µm.bs
D4K_385nm_Flexcera Smile_100µm.bs
D4K_385nm_FreePrint Denture+_100µm.bs
D4K_385nm_KeySplint Soft_100µm_v1.6.bs
D4K_385nm_NextDent C&B MFH_100µm.bs
D4K_385nm_NextDent Denture 3D+_100µm.bs
D4K_385nm_NextDent Try-In_100µm.bs
D4K_385nm_Press-E-Cast_LED_50µm_v1.bs
D4K_Model_X_50µm_v1.3.bs
D4K_Model_X_75µm_v1.3.bs
D4K_Model_Z_100µm_v1.0.bs