Manual Debris Removal

This tab helps simplify the process of cleaning the material tray.

To remove debris from the material tray, complete the following steps:  

1. Select Settings > Manual Debris Removal to open the tab.

Manual_Debris_Removal_e1cdlm.png

2. Set the required exposure time using the + and icons.

Tip: The time is material-dependent, though the 15-second time interval works well for most materials.

3. Press Expose.
→ The whole material tray area is exposed.

4. Remove debris from the material tray by taking away a thin film of the exposed material.

5. If needed, proceed with material filtering. See Maintain Materials for details.