Electrical Requirements

We strongly recommend you use an uninterrupted power supply to protect your printer. All electrical requirements must be met to ensure the most stable setup:
  • D4K™ – 19 VDC / 4.73 A
  • With adapter (included) – 100 to 240 VAC, 1.5 A, 50 to 60 Hz
  1. Plug the printer into a separate surge protector or battery backup.

  2. If your electrical line is prone to spikes and dips, you will need to use a UPS battery backup system for the printer with a switch changing time of less than 1 millisecond.

  3. Do not plug any additional equipment into the power circuit.

  4. Ensure there is a sufficient clean electrical socket that fluctuates no more than +/- 3% (EU: +/- 5%) from its baseline.