Material Cure Times

Below is a list of recommended curing times for compatible materials in the PCA 2000 light polymerization chamber.

Important: Curing times are subject to change.

Industrial

Material Time (H:MM:SS) Temp. Power
ABS Tough White - MCAD 0:08:00 20˚ C 100%
E-Rigid Form (Charcoal, Amber) 0:08:00 20˚ C 100%
E-Rigid PU - MCAD 0:10:00 60˚ C 100%
HTM140 (V2, V3) 0:07:30 60˚ C 100%
RC Series (RC90, RC70) 0:20:00 60˚ C 100%

Jewelry

Material Time (H:MM:SS) Temp. Power
Easy Cast 2.0 2:15:00 60˚ C 100%
EC-3000 0:22:30 60˚ C 100%
EC-500 1:05:00 60˚ C 100%
EPIC 1:05:00 60˚ C 100%
PIC 100 (PIC 100 C, PIC 100 G, PIC 200)

First cycle: 0:32:30

 60˚ C 100%

Second cycle: 0:32:30

 60˚ C 100%
WIC 100 Series (WIC 100 G) 0:02:30 60˚ C 100%

Dental

Material Time (H:MM:SS) Temp. Power
ABS Tough White - Dental 0:02:00 20˚ C 100%
NextDent Gingiva Mask 0:05:00 60˚ C 100%
E-Model (Light, Beige) 0:02:00 20˚ C 100%
E-Orthoshape 0:02:00 20˚ C 100%
E-Partial 0:08:00 20˚ C 100%
E-Rigid PU - Dental 0:02:00 20˚ C 100%
E-SepFree 0:07:30 60˚ C 100%
Press-E-Cast 0:03:00 60˚ C 100%
WIC 402 0:08:00 20˚ C 100%